Operated by Berryman Electrical

Urgent electrical fault help

Emergency Electrician Byron Bay

Electrical fault that needs attention now?

Lost power, repeated tripping, a switchboard fault, sparking, heat or a burning smell? Call a licensed electrician and describe what is happening. You do not need to diagnose the fault yourself.

Call 0424 157 002 Check your symptom ↓

26+ years electrical experience NSW licensed contractor Byron Bay & nearby

Immediate danger? If there is fire, electric shock, active arcing, a fallen powerline or an immediate threat to people, keep clear and call 000. For electricity-network emergencies or widespread outages in the Byron Bay area, contact Essential Energy on 13 20 80.

Start with the symptom

What’s happening right now?

Choose the closest match. This is not a DIY diagnosis — it is a quick way to decide the safest next step.

Whole property has lost power

Check whether neighbours or nearby properties are also out. A wider outage may be on the electricity network. If the street has power but your property does not, call an electrician.

Part of the property has lost power

Dead powerpoints, lights or one section of the property can point to a circuit or installation fault. Call and describe which areas are affected and what the switchboard is doing.

Safety switch or breaker keeps tripping

If a protective device keeps operating, avoid repeatedly forcing it back on. Call for fault finding and explain when it trips and what was running.

Burning smell, heat or scorch marks

Keep clear of the affected fitting or equipment. If there is smoke, fire or immediate danger, call 000. Otherwise arrange urgent electrical assessment.

Sparking, buzzing or damaged wiring

Do not touch exposed conductors or damaged electrical parts. Keep people away from the area. Call for advice and electrical assessment.

Switchboard problem

Heat, unusual noise, visible damage or repeated tripping at a switchboard deserves proper assessment rather than repeated resetting. Call and describe exactly what you can see or hear.

Water near electrical equipment

Do not touch wet electrical equipment, switches or fittings. Keep clear and avoid entering water that may be electrically energised. Call for advice; use 000 if there is immediate danger.

Business circuit or equipment has failed

Tell me what equipment or area is down, whether production/service has stopped, and what protection has operated. The first step is usually isolating the fault and narrowing down the cause.

Something else electrical is wrong

You do not need the technical name for the problem. Call and describe what changed, what is no longer working and anything unusual you noticed.

Is it your property — or is the street out too?

Byron Bay is in Essential Energy’s network area. If your whole property is out, check whether a network outage is already listed. If nearby properties have power but yours does not — or your switchboard is tripping — the problem may be within the property.

Check outages ↗

What happens next

Make safe. Find the cause. Then decide the repair.

Emergency electrical work should not begin with guesswork. The useful first outcome is understanding what has failed, what is unsafe and what needs to happen next.

01 · Call

Describe the symptom.

Suburb, what has failed, what the switchboard is doing and any heat, smell, sparking, water or visible damage.

02 · Make safe

Deal with the hazard first.

Unsafe equipment or circuits are prioritised so the immediate risk is understood and controlled.

03 · Diagnose

Test the fault methodically.

Narrow down the affected circuit, equipment or installation rather than simply replacing parts and hoping.

04 · Repair / explain

Make the next step clear.

Repair where practical, or explain what is required next so you know exactly where the job stands.

Availability and pricing are confirmed before attendance.

Call to check the current attendance time and the applicable fault-finding or callout charge. If further diagnosis, parts or repair work are required, the next step is explained as the fault becomes clear.

Call first · no hidden promise of 24/7 attendance

Real fault-finding experience

Real electrical faults. Proper diagnosis.

Berryman Electrical uses genuine work evidence rather than generic stock imagery. The work archive includes heat-damaged wiring, damaged electrical equipment and faults that only become obvious once the installation is tested or opened up.

Heat-damaged wiring

Real fault evidence from the Berryman Electrical work archive.

Hidden electrical faults

The visible symptom is not always the actual cause — diagnosis comes first.

See Berryman Electrical fault-finding work →

Emergency electrical help

Focused on urgent electrical faults in Byron Bay.

Call for sudden loss of power, repeated tripping, sparking, heat, burning smells, switchboard problems or another electrical fault that needs prompt assessment. Nearby Byron localities including Suffolk Park, Ewingsdale and Broken Head are also serviced subject to normal availability.

Urgent fault

Something has failed or become unsafe.

Start here when the problem is happening now and you need the fault made safe, diagnosed and the next repair step explained.

Planned electrical work

Know what work you want done?

For lighting, power, switchboards, EV charging, renovations and broader electrical work, visit Berryman Electrical →

Useful questions

Before you call.

My safety switch keeps tripping. Should I keep resetting it?

If it repeatedly trips, stop repeatedly resetting it and arrange an electrical assessment. A protective device is operating for a reason; the useful next step is finding whether the problem sits in a circuit, connected equipment or somewhere else in the installation.

The whole property is out. Do I call an electrician or Essential Energy?

If nearby properties are also without power, check Essential Energy’s outage information first. If the surrounding area has power but your property does not, or your switchboard has operated, call an electrician.

Can you help if only part of the property has lost power?

Yes. Loss of power to one section, circuit or group of outlets is a common fault-finding situation. Explain which areas are affected and whether anything is tripped at the switchboard.

What should I have ready when I call?

Your suburb, what has stopped working, whether the whole property or only one area is affected, what the switchboard is doing, and whether you noticed heat, smell, sparking, water or visible damage.

Do you attend businesses as well as homes?

Yes. Urgent commercial faults can include failed circuits, equipment supply problems, lighting faults and switchboard issues. Tell me what has stopped and how it is affecting the business.

Are you available 24 hours a day?

This site does not make a blanket 24/7 attendance promise. Call to check current availability, location and the likely attendance time for the fault.

Is this a separate company from Berryman Electrical?

No. This website is a focused emergency-service resource operated by Berryman Electrical. The same business, licence and phone number sit behind the service.